Founder & editor

[TO FILL: author name]

Author photo: [TO FILL: real photo]

[TO FILL: author bio]

3D printing & engineering background

[TO FILL: author printing experience]

Printers & metrology gear used for bench tests

[TO FILL: author current printers]

Bench measurements described in guides are run on this equipment. Until a test has been completed, the guide shows a “Field test pending” box instead of results; see the first-hand bench testing policy.

Profiles elsewhere

[TO FILL: real GitHub / Printables / forum profiles, optional]

Guides by this editor

• Designing 3D-Printed Parts That Fit: Clearances and Tolerances
• 3D Printing Cost Math: Filament, Electricity, and Wear
• Stepper Angles, GT2 Belts, Lead Screws, and Z Layer Heights
• Calibrating Extruder E-Steps and Klipper Rotation Distance
• Filament Moisture, Hydrolysis, and Drying Temperatures
• First-Layer Squish, Line Width, and Z-Offset Calibration
• Slicer Flow Rate and Extrusion Multiplier Calibration Math
• Maximum Volumetric Speed Explained: Hotend Flow Rate Math
• Nozzle Diameter vs. Layer Height, Line Width, and Overhangs
• PLA vs PETG vs ASA: Mechanical and Thermal Trade-Offs
• Retraction, Stringing, and Pressure Advance Explained
• Why Vertical and Horizontal 3D-Printed Holes Print Undersized